Get Free Quotes

We will call you back right away!


Home Security


Advanced Technology Offers the Best Protection for Your Family

Your family and home are valuable. Statistics* show across Australia, a home is burgled just about every minute! Make sure you have adequate protection ion for your needs. We have a full range of sophisticated security sensors to detect unauthorized entry into specific areas of your home. These sensors communicate with Hills Reliance Security System to give you peace of mind. If an intrusion attempt is detected when the system is “Armed”, a loud siren will sound to deter the intruder and draw attention to the situation. In the den of an emergency, a signal can be reported to a 24hr alarm monitoring centre. The monitoring centre can then respond with the appropriate service such as phong you or sending a patrol guard to investigate.

Innovative. Style. Easy to Operate.

Hills Reliance uses advanced technology to make your life easier. One simple key press as you are leaving will turn on (Arm) your security system. When you return home simply enter your PIN code on a security code pad to turn off (Disarm) your security system. Or upgrade with a small wireless key fob which allows you to Arm, Disarm, activate the sirens (panic alarm) and if connected, control your garage door. When your family is home at night, the Hills Reliance can be Armed in the partial mode to monitor your home’s perimeter – allowing your freedom to move around inside whilst protecting you from intruders.

Each Hills Reliance code pad has three dedicated emergency buttons to allow you to alert your Alarm Monitoring Station in the event of a fire, medical or personal emergency.

Hills Reliance TouchNav is an intuitive graphical touch screen interface for users of the Hills Reliance security system. Offering simple fingertip control of the security system with a clear 3.5″ touch screen with easy to understand graphics. It can be customized for each location when it is installed. This includes custom naming of zones, areas, users and output names. Users can even leave messages for other users via the internal message centre. With the Hills Reliance TouchNav, security is just a touch away.

Home Security Overview

The Hills Reliance TouchNav is an intuitive graphical touch screen interface for users of the Hills Reliance security system. Offering simple ngertip control, via its clear 3.5” touch screen with easy to understand graphic icons.

Disarming the security system.

To disarm the security system, tap the “Off Icon”, a pin pad will display, enter a valid pin code.

Away Arming the security system.

Whilst the status bar is displaying the message “Area Ready” tap the “Away Icon”, this will arm the security system fully. The system will not arm if the status bar is displaying “Not Ready”, all sensors must be closed.

Chime mode

Chime allows sensors to sound a “beep” at the TouchNav whenever they are tripped. Chime is only available whilst the security system is in the disarmed state.
Tap the “Chime Icon” to toggle chime mode on/off.
**This feature needs to be enabled by your security provider**

Stay Arming the security system.

Whilst the status bar is displaying the message “Area Ready” tap the “Stay Icon”, this will partially arm the security system. Predetermined sensors will be isolated, and all remaining sensors will be active.

SOS (Emergency keys)

Only press these keys in a situation that requires a response by emergency personnel. Your system may not be programmed for these activation
keys, so check with your security provider. If your system is programmed for these functions, the following reports can be sent.
**This feature needs to be enabled by your security provider**

Fire Key – When touched for two seconds, this key will sound the audible re alarm, with a steady alarm sound. If your system is connected to a monitoring centre, a re report could be sent.

Medical Key – When touched for two seconds, this key will sound the TouchNav sounder. If your system is connected to a monitoring centre, a medical report could be sent.

Police (Panic) Key – When touched for two seconds, this key will sound the audible panic alarm, with a yelping alarm sound. If your system is connected to a monitoring centre, a panic report could be sent.

Some Panic alarms are programmed to be silent at the protected site while reporting an alarm to the monitoring centre, check with your security provider on how your system has been con gured.

To acknowledge / cancel an alarm, tap the Off Icon and enter a user pin code.

Main Menu

Tap Menu to access additional feature’s for controlling / customising the Hills Reliance security system.
**This feature needs to be enabled by your security provider**

Settings Menu

Tap Menu > Settings to access the following features located within the settings menu.
Set system time and date
Adjust system entry and exit times
SMS and alarm phone numbers. (Additional equipment required for SMS) Text input for zones, areas , users, outputs and messages
Speaker volume
Adjust display touch and brightness

Controls Menu

Tap Menu > Controls to access the following features located within the control menu.
Zone / sensor control. Bypass, add to chime group
Arm / Disarm single or multiple areas within the security system
Control up to 16 separate outputs Add, create or delete user pin codes Add, create or delete access cards

Zones (Bypassing)

Tap Menu > Control > Zones Select > Zone > Bypass
Selected zones (sensors) within the security system can be bypassed (isolated) manually. A bypassed zone is not capable of activating an alarm, as it is temporarily removed from your system. All bypassed zones are reset and cleared from memory when the security system is next armed / disarmed.

Share This